Skip to content
Eagle Machine Inc.

Eurotech Toro 2-guideway flat bed lathes

2-guideway CNC flat bed lathes in five models

Built to order. Ask for lead time.

Eurotech Toro 2-guideway flat bed lathes
Request a quote Schedule a demo
Download the catalog
Overview

Five ATL models from 19.7 to 94 in swing over bed, built in Italy

The Toro ATL line is Eurotech's 2-guideway flat bed lathe range, built in Italy in five models from the ATL Neos EVO to the ATL Megalos EVO. Swing over bed runs from 19.7 in to 94 in, spindle bores from 3.23 in standard to 25 in optional, and main motors from 29 HP (S6) standard to 141 HP optional. The ATL Heavy Plus EVO and ATL Megalos EVO add a third, bottom supporting guideway that Eurotech says keeps the cross carriage stable for heavy cuts on large diameters. FANUC control is standard, and beds, headstocks, tailstocks and carriages are cast iron.

At a glance
Swing over bed
19.7 to 94 in
Distance between centers
Up to 591 in
Spindle bore
3.23 to 5.12 in, up to 25 in optional
Main spindle
Up to 2,200 rpm, 29 to 97 HP (S6), 141 HP optional
Control
FANUC standard, other controls optional

Features

  1. Spindle and bearings
    01Spindle and bearingsThe spindle is case-hardened and ground and runs on high-precision NNK cylindrical roller bearings with oil lubrication, in a 3-point spindle line. Bearings come from SKF, FAG, NSK or Timken.
  1. 02Third guideway on the large framesThe ATL Heavy Plus EVO and ATL Megalos EVO carry a bottom supporting guideway, listed as 3 (2+1). Eurotech says it keeps the cross carriage stable and allows heavy cuts on large diameters. It is an option on the ATL Heavy EVO, listed as 2 (opt. 3).
  2. 03Automatic gearbox on the main motorA Baruffaldi automatic speed-change gearbox with a 1:4 ratio sits on the main motor to raise power at low speed. Eurotech lists it as standard on the ATL EVO, ATL Heavy EVO and ATL Heavy Plus EVO.
  3. 04Hardened ways, cast iron frameBed, headstock, tailstock and carriages are cast iron. On the ATL Neos EVO, ATL EVO, ATL Heavy EVO and ATL Heavy Plus EVO, guideways are induction hardened and ground to 50 to 55 HRC, and the carriages slide on antifriction material.
  4. 05Ballscrews, then rack drive on long bedsOn the ATL Heavy EVO and ATL Heavy Plus EVO, X and Z run on ground, certified ballscrews up to 5,000 mm between centers. From 6,000 mm the longitudinal carriage moves on a hardened, ground rack with inclined teeth, a double preloaded pinion and two servomotors.
  5. 06FANUC standard, other controls offeredFANUC is standard. Siemens, Fagor and Heidenhain are available, and with each brand Eurotech uses the full component package from that NC supplier, which it says ensures compatibility.

Video

Toro series, flat bed lathe introduction

Specifications

ItemATL series
ATL Neos EVOATL EVOATL Heavy EVOATL Heavy Plus EVOATL Megalos EVO
Range
Sizes250, 280, 310, 350, 400320, 370, 380, 420, 500400, 500, 550, 600500, 625, 700, 800800, 900, 1000, 1100, 1200
Number of guideways2+2+2 (opt. 3)3 (2+1)3 (2+1)
Bed widthin15.75 (opt. 19.7) on 250 to 350, 19.7 on 40020.8 on 320 and 370, 22 on 380 to 50023.629.743
Capacity
Height of centresin9.8 to 15.7512.6 to 19.715.75 to 23.6219.6 to 31.531 to 47
Swing over bedin19.7 to 31.525.2 to 39.331.5 to 47.239.4 to 64.863 to 94
Swing over cross slidein9.4 to 21.213.78 to 25.219.69 to 33.425.6 to 47.247 to 79
Distance between centersOn request39.4 to 236.2 in59 to 196.8 inOn request79 to 591 in
Max. weight between centerslb3,306 (ATL Neos EVO 250)5,511 on 320 and 370, 6,613 (opt. 8,818) on 380 to 5001,123 (opt. 1,430)2,2463,968 (opt. 5,512)
Spindle
Spindle borein3.23 (opt. 4.1) on 250, 4.1 (opt. 3.2-5.1-6.3-8) on 280 to 4005.12 on 320 and 370, 5.12 (opt. 6.3-8-10.2-12.4-13.98) on 380 to 5005.1 (opt. 5.9-11)5.12 (opt. 6.3-14.1)5.12 (opt. 4-18-25)
Spindle noseCamlock 8" on 250, 8" (opt. 11") on 280 to 400Camlock 11"ASA A2-11ASA A2-15ASA A2-15 (opt. A2-20)
Spindle speedrpm0-2,200 on 250, 0-1,800 on 280 to 4000-1,5000-1,2000-8000-600
Speed ranges (automatic)1-22222 (opt. 4)
Main motor power (S6/S1)HP29/20 (opt. 34.8/24.8) on 250 to 310, 34.8/24.8 (opt. 44.2/29.5) on 350 and 40044.2/29.5 (opt. 60.3/40.2)40.2 (opt. 49.6)75/49 (opt. 96/73)97/74 (opt. 141/95)
Axes and tailstock
Cross slide travelin11.8 to 13.3915.75 to 19.719.7 to 23.6228.3 to 31.547
X-Z axis rapid traverseft/min39.332.8129.926.2526
Tailstock quill diameterin3.33.94 on 320 and 370, 4.13 (opt. 4.72) on 380 to 5004.7 (opt. 7.8 rotating quill)On request9 rotating quill (opt. 11)
Tailstock quill travelin5.9 on 250, 7.87 on 280 to 4008.669.8On request16
Tailstock quill taperMorse 5Morse 5 on 320 and 370, Morse 6 on 380 to 500Morse 6Morse 680; 1:7
Control and weight
CNCFANUC standard, other controls optionalFANUC standard, other controls optionalFANUC standard, other controls optionalFANUC standard, other controls optionalFANUC standard, other controls optional
Machine weight at 3,000 mm (118 in) between centerslbOn request-25,353 to 27,33736,765 to 39,22559,525 to 77,160
Each additional meterlb--3704,4955,510
Specifications from the manufacturer. Confirm the configuration on your quote.

Downloads

Request a quote

Send the details and we will price the Toro ATL Neos EVO / ATL EVO / ATL Heavy EVO / ATL Heavy Plus EVO / ATL Megalos EVO with freight, rigging and the options you need.

Before you order: what your shop needs ready and the 2026 Section 179 rules

Call sales(817) 472-5178

About: Eurotech Toro 2-guideway flat bed lathes

We keep what you send so we can answer you. Privacy