Eurotech Multipla
13-axis, three-turret twin-spindle turn/mill center
Built to order. Ask for lead time.
Three Y-axis turrets on two C-axis spindles, built to finish complex bar parts in one operation
The Multipla is Eurotech's triple-turret bar machine: two spindles with C-axis and three 12-station live-tool turrets, each with its own Y-axis, for 13 axes in all. It is built for medium-sized batches of complex parts, with three tools able to cut at the same time and the lower turret able to work on either spindle for 4-axis turning. Three sizes cover bar work from 2.0 to 3.15 in, with main spindles from 20 HP at 5,000 rpm (B446) to 35 HP at 3,200 rpm (B481). A programmable parts gantry, parts conveyor, bar-feeder interface and tool probes for all turrets come standard.
Guide: Twin-turret or single-turret lathe: what do more turrets add?
- Bar capacity
- 2.0 to 3.15 in
- Main spindle
- 3,200 to 5,000 rpm, 20 to 35 HP
- Turrets
- 3 x 12 stations, live tooling
- Axes
- 13 (3 Y-axes, 2 C-axes)
- Control
- FANUC
Features
01Three 12-station turretsTwo upper turrets and one lower turret, all with live tooling and their own Y-axis. Three tools can cut at once, and the lower turret can work on the main spindle or the sub-spindle for 4-axis turning.
02Programmable parts gantryA servo gantry, positioned by a CNC axis, unloads finished parts while tools are still in the cut. The catcher rotates 180 degrees to clear both parts and bar remnants, and Eurotech rates it for parts up to 180 mm (7.1 in) long.
03Gap Elimination softwareEurotech's logic software removes forced dwells between operations, so turning, C-axis and Y-axis moves run back to back. SBS tool load monitoring, tool life management and stress load management are also standard.
04Tool probes for all turretsTwo tool probes serve all three turrets for tool offsetting in the machine, which cuts set-up time.
- 05Rigidity and thermal stabilityThermally designed cast iron bed, Heidenhain scales on the main and sub-spindle, and a 4-column Y-axis slide for rigidity and thermal stability.
Video
Specifications
| Item | Multipla B446 / B465 / B481-T3Y3 | |||
|---|---|---|---|---|
| B446-T3Y3 | B465-T3Y3 | B481-T3Y3 | ||
| Machining capacity | ||||
| Bar capacityin | in | 1.77 (2.00) | 2.56 (2.75) | 3.15 |
| Chuck diameterin | in | 8 | 8 | 8 |
| Max. length between spindle facesin | in | 37.5 | 37.5 | 37.5 |
| Max. swing over diameterin | in | 20.0 | 20.0 | 20.0 |
| Main spindle | ||||
| Max. speedrpm | rpm | 5000 | 4000 | 3200 |
| Spindle noseASA | ASA | 5" | 6" | 8" |
| Spindle borein | in | 2.17 | 3.15 | 3.15 |
| Chuck diameterin | in | 8 | 10 | 10 |
| Motor powerHP | HP | 20 | 35 | 35 |
| C-axis min. programmable value° | ° | 0.001 | 0.001 | 0.001 |
| Sub-spindle | ||||
| Max. speedrpm | rpm | 5000 | 5000 | 5000 |
| Spindle noseASA | ASA | 5" | 5" | 5" |
| Spindle borein | in | 2.17 | 2.17 | 2.17 |
| Chuck diameterin | in | 6/ | 6/ | 6/ |
| Motor powerHP | HP | 15 | 15 | 15 |
| C-axis min. programmable value° | ° | 0.001 | 0.001 | 0.001 |
| Offset strokein | in | 4.72 | 4.72 | 4.72 |
| B-axis stroke / rapid traversein / ipm | in / | 26.35 / | 26.35 / | 26.35 / |
| Turrets (upper left, upper right, lower) | ||||
| Stations / max. toolsno. | no. | 12 / | 12 / | 12 / |
| Turret indexing (1 position)sec | sec | 0.15 | 0.15 | 0.15 |
| Live tool stations / max. live toolsno. | no. | 36 / | 36 / | 36 / |
| Live tool max. speedrpm | rpm | 4000 | 4000 | 4000 |
| Live tool motor powerHP | HP | 5 geared | 5 geared | 5 geared |
| X1-X2-X3 stroke / rapid traversein / ipm | in / | 6.7 / | 6.7 / | 6.7 / |
| Z1-Z2 stroke / rapid traversein / ipm | in / | 9 / | 9 / | 9 / |
| Z3 stroke / rapid traversein / ipm | in / | 21.3 / | 21.3 / | 21.3 / |
| Y1-Y2-Y3 stroke / rapid traversein / ipm | in / | 3.54 [-1.57/ | 3.54 [-1.57/ | 3.54 [-1.57/ |
| Cooling system | ||||
| Tank capacitygal | gal | 120 | 120 | 120 |
| Motor rating of 4 electropumpsHP | HP | 5 | 5 | 5 |
| Dimensions and weight | ||||
| Machine with chip conveyorin | in | 173 x 85 x 89 h | 173 x 85 x 89 h | 173 x 85 x 89 h |
| Spindle center heightin | in | 42 | 42 | 42 |
| Machine weight with chip conveyorlb | lb | 18,200 | 18,500 | 19,200 |
Request a quote
Send the details and we will price the Multipla B446 / B465 / B481-T3Y3 with freight, rigging and the options you need.
Before you order: what your shop needs ready and the 2026 Section 179 rules
Call sales(817) 472-5178Related machines
- Eurotech Ultima B620Single-turret turn/mill center with Y-axis and sub-spindle
- Eurotech StallionLarge single-turret turn/mill center with Y-axis and sub-spindle
- Eurotech Trofeo BMX11-axis double-turret turn/mill center
- Eurotech Rapido BMX10-axis double-turret turn/mill center
- Eurotech Xtreme8-axis Swiss-type lathe with C-axis main and sub-spindle and Y2
- Eurotech Kobra7-axis hybrid Swiss-type lathe, Y2 available on all models
- Eurotech Gepard7-axis hybrid Swiss-type lathe
- Eurotech Diamont10-axis hybrid Swiss-type lathe with turret
