Eurotech Stallion
Large single-turret turn/mill center with Y-axis and sub-spindle
Built to order. Ask for lead time.
Overview
Bar, chuck and long-shaft work, turned and milled complete on both sides
The Stallion is Eurotech's single-turret turn/mill center for larger bar and chuck work, built as the B750 and B1250 for 750 mm or 1250 mm of turning length. Both SLY models share the same 12- or 16-station direct-drive live turret, Y-axis slide and ASA 6 in sub-spindle with C-axis, and the B1250 extends Z travel from 34 in to 51.6 in for long shafts. Main spindle choices are ASA 6 in at 4,500 rpm, ASA 8 in at 3,200 rpm and ASA 8 in at 3,000 rpm for bar up to 4.03 in, with chucks from 9.8 to 15.7 in. Live tools are rated 20 HP and 10,000 rpm, limited to 6,000 rpm with standard rotary tools.
Guides: what a second turret adds and when a part needs a turn-mill
At a glance
- Bar capacity
- 2.8 to 4.03 in
- Main spindle
- 3,000 to 4,500 rpm, 29.5 to 53.6 HP (S3)
- Turrets
- 1 x 12 or 16 stations, all live
- Axes
- Up to 6, with Y-axis and C-axis on both spindles
- Control
- FANUC 32i-T with i-HMI, 15 in touch screen
Features
01Direct-drive live turretThe 12- or 16-station servo turret has a 9.05 in HIRTH coupling, indexes in 0.3 sec and takes up to 34 tools working at once. A cooled built-in motor in the tool plate drives the live tools directly: 20 HP, 35.2 lb ft and 10,000 rpm, limited to 6,000 rpm with standard rotary tools. Eurotech lists up to 96 cutting tools with its EGS gang tooling and the Y-axis.
02Two lengths, long-shaft optionsThe B750 has 34 in of Z stroke and the B1250 has 51.6 in. Eurotech describes the B1250 as particularly suited to long shafts: on the B1250 range the CNC tailstock has a 4.5 in hydraulic quill with 5.9 in of stroke, and an automatic self-centering steady-rest for shafts up to 9.448 in diameter is an option.
03Rigid bed, controlled heatCast-iron bed with flat, hardened and ground slideways on all axes. A cooling unit controls the temperature of the motor spindles and hydraulic unit to hold dimensions over long runs.
- 04Three main spindle sizesLiquid-cooled built-in motor spindles on roller and ball bearings, in three sizes: ASA 6 in (2.8 in bar, 4,500 rpm, 211 lb ft), ASA 8 in (3.1 in bar, 3,200 rpm, 516.3 lb ft) and a larger ASA 8 in for 3.7 or 4.03 in bar (3,000 rpm, 748 lb ft).
- 05Sub-spindle with C-axisThe ASA 6 in sub-spindle runs to 4,500 rpm at 40 to 53.6 HP and carries C-axis on the SLY. The part transfers automatically from the main spindle with B-axis load detection, and the sub-spindle positions over 35.2 in on the B750 and 44.5 in on the B1250, at 79 ft/min.
- 06FANUC i-HMI with Eurotech softwareFANUC i-HMI on a 15 in color touch screen with MANUAL GUIDE programming, Ethernet, memory card and USB. Eurotech's Gap Elimination Logic removes forced dwells between turning, C-axis and Y-axis moves.
Video
Stallion B1250, pump part in one setup at Thompson Pump
Specifications
| Item | Stallion B series | ||
|---|---|---|---|
| Stallion B750-SLY | Stallion B1250-SLY | ||
| Machining capacity | |||
| Max. swing over diameterin | in | 26.8/ | 26.8/ |
| Main spindle, ASA 6" (70 mm) | |||
| Max. bar machining diameterin | in | 2.8 | 2.8 |
| Max. suggested machining diameterin | in | 21.7/ | 21.7/ |
| Max. machining lengthin | in | 30 | 30 |
| Max. speedrpm | rpm | 4500 | 4500 |
| Spindle noseASA | ASA | 6" | 6" |
| Spindle borein | in | 3.1 | 3.1 |
| Inside diam. of bearingsin | in | 4.3 | 4.3 |
| Chuck diameterin | in | 9.8 | 9.8 |
| Motor power (S1-S3)HP | HP | 40-53.6 | 40-53.6 |
| Max. torque (S1-S3)lb-ft | lb-ft | 211 | 211 |
| Main spindle, ASA 8" (80 mm) | |||
| Max. bar machining diameterin | in | 3.1 | 3.1 |
| Max. suggested machining diameterin | in | 21.7/ | 21.7/ |
| Max. machining lengthin | in | 30 | 47 |
| Max. speedrpm | rpm | 3200 | 3200 |
| Spindle noseASA | ASA | 8" | 8" |
| Spindle borein | in | 3.6 | 3.6 |
| Inside diam. of bearingsin | in | 5.1 | 5.1 |
| Chuck diameterin | in | 12.4 | 12.4 |
| Motor power (S1-S3)HP | HP | 20-29.5 | 20-29.5 |
| Max. torque (S1-S3)lb-ft | lb-ft | 294-516 | 294-516 |
| Main spindle, ASA 8" (95-102.5 mm) | |||
| Max. bar machining diameterin | in | 3.7/ | 3.7/ |
| Max. suggested machining diameterin | in | 21.7 | 21.7 |
| Max. machining lengthin | in | 30 | 47 |
| Max. speedrpm | rpm | 3000 | 3000 |
| Spindle noseASA | ASA | 8" | 8" |
| Spindle borein | in | 4.2/ | 4.2/ |
| Inside diam. of bearingsin | in | 5.9 | 5.9 |
| Chuck diameterin | in | 15.7 | 15.7 |
| Motor power (S1-S3)HP | HP | 40-60 | 40.2-51 |
| Max. torque (S1-S3)lb-ft | lb-ft | 590-748 | 590-748 |
| Sub-spindle | |||
| Max. speedrpm | rpm | 4500 | 4500 |
| Spindle noseASA | ASA | 6" | 6" |
| Spindle borein | in | 3.1 | 3.1 |
| Drawtube inside diameterin | in | 2.8 | 2.8 |
| Inside diam. of bearingsin | in | 4.3 | 4.3 |
| Chuck diameterin | in | 8.3-9.8 | 8.3-9.8 |
| Motor powerHP | HP | 40-53.6 | 40-53.6 |
| Max. torquelb-ft | lb-ft | 211 | 211 |
| B-axis automatic positioningin | in | 35.2 | 44.5 |
| B-axis rapid traverseft/min | ft/ | 79 | 79 |
| Turret | |||
| No. of toolsNo. | No. | 16/ | 16/ |
| Tool shank for OD turningin | in | 1x1 | 1x1 |
| Tool shank for ID turningin | in | 1.3-1.6 / | 1.3-1.6 / |
| Turret indexing (1 pos)sec | sec | 0.3 | 0.3 |
| Live tooling | |||
| No. of live toolsNo. | No. | 16/ | 16/ |
| Max. speedrpm | rpm | 10,000 | 10,000 |
| Motor powerHP | HP | 20 | 20 |
| Max. torquelb ft | lb ft | 35.2 | 35.2 |
| C-axis | |||
| Min. programmable valuedeg | deg | 0.001 | 0.001 |
| Max. rapid traverserpm | rpm | 100 | 100 |
| Axes | |||
| X-axis strokein | in | 12 | 12 |
| Z-axis strokein | in | 34 | 51.6 |
| X-axis rapid traverseft/min | ft/ | 59 | 59 |
| Y-axis rapid traverseft/min | ft/ | Not listed | 24.6 |
| Z-axis rapid traverseft/min | ft/ | 78.7 | 78.7 |
| Tailstock | |||
| Automatic quill strokein | in | Not listed | 5.9 |
| Quill diameterin | in | Not listed | 4.5 |
| Morse taperMT | MT | Not listed | 5 |
| Automatic positioningin | in | Not listed | 51.6 |
| B-axis tailstock | |||
| Morse taperMT | MT | 4-5 | 4-5 |
| B-axis automatic positioningin | in | 35.8 | 45 |
| B-axis rapid traverseft/min | ft/ | 49 | 49 |
| Cooling system | |||
| Tank capacitygal | gal | 79 | 79 |
| Pump nominal displacementgal/min | gal/ | 16 | 16 |
| Electropump motor ratingHP | HP | 1.5 | 1.5 |
| Dimensions and weight | |||
| Machine with swarf conveyorin | in | 208x80x97.6h | 221x86x98h |
| Spindle centre heightin | in | 42 | 42 |
| Machine weight with swarf conv., ASA 6" (70 mm)lb | lb | 15100 | 17400 |
| Machine weight with swarf conv., ASA 8" (80 mm)lb | lb | 16200 | 18500 |
| Machine weight with swarf conv., ASA 8" (95-102.5 mm)lb | lb | 16500 | 18800 |
Request a quote
Send the details and we will price the Stallion B750 / B1250-SLY with freight, rigging and the options you need.
Before you order: what your shop needs ready and the 2026 Section 179 rules
Call sales(817) 472-5178Related machines
- Eurotech Ultima B620Single-turret turn/mill center with Y-axis and sub-spindle
- Eurotech Trofeo BMX11-axis double-turret turn/mill center
- Eurotech Rapido BMX10-axis double-turret turn/mill center
- Eurotech Multipla13-axis, three-turret twin-spindle turn/mill center
- Eurotech Xtreme8-axis Swiss-type lathe with C-axis main and sub-spindle and Y2
- Eurotech Kobra7-axis hybrid Swiss-type lathe, Y2 available on all models
- Eurotech Gepard7-axis hybrid Swiss-type lathe
- Eurotech Diamont10-axis hybrid Swiss-type lathe with turret
