Hwacheon VESTA-2000
Vertical machining center for parts machining
VESTA Series
Built to order. Ask for lead time.
Overview
2,000 x 850 x 800 mm travels, 1,800 kg table load
The VESTA-2000 is a vertical machining center for parts machining with an 850 mm Y axis and roller LM guides on every axis. Travels are 2,000 / 850 / 800 mm over a 2,000 x 850 mm table rated for 1,800 kg. The direct-coupled spindle is BT-40 at 10,000 rpm as standard, with 12,000 and 15,000 rpm options, or BT-50 at 8,000 rpm with 287 Nm. Four coil conveyors carry chips out of the work area.
Guides: when an HMC makes sense and choosing your first or next VMC
At a glance
- X / Y / Z travel
- 78.7 / 33.5 / 31.5 in
- Table size
- 78.7 x 33.5 in
- Spindle
- BT-40, 10,000 to 15,000 rpm; BT-50, 8,000 rpm
- Tool capacity
- 30 BT-40 or 24 BT-50 (30 opt.)
- Control
- FANUC 0i-MF Plus
Features
- 01Roller LM guides on every axisAll three axes run on high-rigidity roller LM guides, and the Y axis uses four guide rails for saddle rigidity.
- 022,000 x 850 mm tableThe table carries 1,800 kg on seven 18 mm T-slots at 125 mm pitch.
- 03Spindle optionsBT-40 at 10,000 rpm is standard, with 12,000 and 15,000 rpm options (18.5 kW, 117.8 Nm on FANUC). A BT-50 spindle runs to 8,000 rpm with 15 kW and 287 Nm. SIEMENS and HEIDENHAIN versions carry their own spindle ratings.
- 04Four coil conveyorsFour coil conveyors carry chips out of the work area, and a stepped coolant tank keeps the front of the table accessible.
- 05Magazines for either taperThe magazine holds 30 BT-40 tools, or 24 BT-50 tools with 30 as an option. HSK-A63 and HSK-A100 shanks are options.
Video
VESTA-2000, machine overview
Specifications
| Item | VESTA-2000 | ||||
|---|---|---|---|---|---|
| 10K BT-40 | 12K BT-40 | 15K BT-40 | 8K BT-50 | ||
| Travel | |||||
| X-axis strokein | in | 78.7 | 78.7 | 78.7 | 78.7 |
| Y-axis strokein | in | 33.5 | 33.5 | 33.5 | 33.5 |
| Z-axis strokein | in | 31.5 | 31.5 | 31.5 | 31.5 |
| Distance from table surface to spindle gauge planein | in | 5.9 ~ 37.4 | 5.9 ~ 37.4 | 5.9 ~ 37.4 | 5.9 ~ 37.4 |
| Distance between column to the center of the spindlein | in | 35.6 | 35.6 | 35.6 | 35.6 |
| Table | |||||
| Working surfacein | in | 78.7 x 33.5 | 78.7 x 33.5 | 78.7 x 33.5 | 78.7 x 33.5 |
| Table loading capacitylb | lb | 3,968 | 3,968 | 3,968 | 3,968 |
| Table surface configuration (T slots W x P / no. of slots)in | in | 0.71 x 4.9 / | 0.71 x 4.9 / | 0.71 x 4.9 / | 0.71 x 4.9 / |
| Spindle | |||||
| Max spindle speedrpm | rpm | 10,000 (Opt.: CTS) | 12,000 (Opt.: CTS) | 15,000 (Opt.: CTS) | 8,000 (Opt.: CTS) |
| Spindle motorHP | HP | 24.8 / | 24.8 / | 24.8 / | 20.1 / |
| Type of spindle taper hole | ISO#40, 7/ | ISO#40, 7/ | ISO#40, 7/ | ISO#50, 7/ | |
| Spindle bearing inner diameterin | in | Ø2.8 | Ø2.8 | Ø2.8 | Ø3.5 |
| Type of spindle | Direct-Coupled | Direct-Coupled | Direct-Coupled | Direct-Coupled | |
| Method of spindle lubrication | Grease | Air-Oil | Air-Oil | Grease | |
| Method of spindle cooling | Jacket Cooling (Fan Cooler) | Jacket Cooling (Oil Cooler) | Jacket Cooling (Oil Cooler) | Jacket Cooling (Fan Cooler) | |
| Feedrate | |||||
| Rapid traverse (X / Y / Z)ipm | ipm | 945 / | 945 / | 945 / | 945 / |
| Motor | |||||
| Servo motor (X / Y / Z)HP | HP | 5.4 / | 5.4 / | 5.4 / | 5.4 / |
| Coolant motor (spindle)HP | HP | 0.8 | 0.8 | 0.8 | 0.8 |
| Spindle cooler (50/60Hz)HP | HP | 0.2 | 3.8 / | 3.8 / | 0.2 |
| ATC | |||||
| Type of tool shank | BT-40 (Opt.: CAT-40 / | BT-40 (Opt.: CAT-40 / | BT-40 (Opt.: CAT-40 / | BT-50 (Opt.: CAT-50 / | |
| Type of pull stud | MAS P40T-1 (45˚) | MAS P40T-1 (45˚) | MAS P40T-1 (45˚) | BT-50 (90˚) | |
| Tool storage capacityea | ea | 30 | 30 | 30 | 24 (Opt.: 30) |
| Max. tool diameter (with / without adjacent tools)in | in | Ø3.0 / | Ø3.0 / | Ø3.0 / | Ø4.9 / |
| Max. tool lengthin | in | 11.8 | 11.8 | 11.8 | 13.8 |
| Max. tool weightlb | lb | 18 | 18 | 18 | 44 |
| Method of tool selection | Memory Random | Memory Random | Memory Random | Memory Random | |
| Power sources | |||||
| Electric power supplykVA | kVA | 45 | 45 | 45 | 45 [CTS : 55] |
| Compressed air supply (pressure x consumption) | 73~102 psi x 690Nℓ/ | 73~102 psi x 690Nℓ/ | 73~102 psi x 690Nℓ/ | 73~102 psi x 690Nℓ/ | |
| Tank capacity | |||||
| Spindle cooling / lubricationgal | gal | 5.3 / | 5.3 / | 5.3 / | 5.3 / |
| Coolantgal | gal | 195.5 | 195.5 | 195.5 | 195.5 |
| Machine size | |||||
| Heightin | in | 143.7 | 143.7 | 143.7 | 143.7 |
| Floor space (L x W)in | in | 235.4 x 145.6 (Opt.: 195.7 x 147.8) | 235.4 x 145.6 (Opt.: 195.7 x 147.8) | 235.4 x 145.6 (Opt.: 195.7 x 147.8) | 235.4 x 145.6 (Opt.: 195.7 x 147.8) |
| Weightlb | lb | 27,999 | 27,999 | 27,999 | 30,644 |
| NC controller | Fanuc 0i-MF Plus | Fanuc 0i-MF Plus | Fanuc 0i-MF Plus | Fanuc 0i-MF Plus | |
Request a quote
Send the details and we will price the VESTA-2000 with freight, rigging and the options you need.
Before you order: what your shop needs ready and the 2026 Section 179 rules
Call sales(817) 472-5178Related machines
- Hwacheon VESTA-610DDual table vertical machining center for parts machining
- Hwacheon VESTA-800High-rigidity vertical machining center
- Hwacheon VESTA-850BHeavy duty vertical machining center for parts machining
- Hwacheon VESTA-1050BHeavy duty vertical machining center for parts machining
- Hwacheon VESTA-1100Vertical machining center for parts machining
- Hwacheon VESTA-1300+Vertical machining center for parts machining
- Hwacheon VESTA-1300B⁺Vertical machining center for parts machining
- Hwacheon VESTA-1650Vertical machining center for parts machining
