Hwacheon VESTA-610D
Dual table vertical machining center for parts machining
VESTA Series
Built to order. Ask for lead time.
Overview
Two 650 x 450 mm tables, 6 second index
The VESTA-610D is a vertical machining center with two tables on an index, so one part is loaded while the other is cut. Hwacheon built it for mass production of parts such as automotive housings and covers. Each table is 650 x 450 mm and carries 300 kg, the tables index 180 degrees in 6 seconds, and hydraulic clamps hold them at 4.8 tons. Travels are 610 / 430 / 570 mm, the direct-coupled BT-40 spindle runs at 10,000 rpm with 12,000 and 15,000 rpm as options, and the magazine holds 24 tools.
Guides: when an HMC makes sense and choosing your first or next VMC
At a glance
- X / Y / Z travel
- 24.0 / 16.9 / 22.4 in
- Table size
- 2 x 25.6 x 17.7 in
- Spindle
- BT-40, 10,000 rpm (12,000 / 15,000 opt.)
- Tool capacity
- 24 tools
- Control
- FANUC 0i-MF Plus
Features
01Dual tables, 6 second indexTwo 650 x 450 mm tables swap in 6 seconds (180 degrees), so a part is loaded on one table while the spindle cuts on the other.
- 024.8 tons of hydraulic clampingHydraulic clamps on a curvic coupling hold the indexed table at 4.8 tons, for stability in heavy roughing and repeatable positioning across large batches.
- 03Prepared for robot loadingAs an option, the tables carry hydraulic or air lines so a robot can be fitted and the machine tied into an automated production line.
- 04Direct-coupled BT-40 spindle10,000 rpm is standard, with 12,000 and 15,000 rpm as options. The spindle is grease lubricated and jacket cooled to limit thermal displacement and extend spindle life.
- 05Chips kept in the cutting areaDouble body covers keep the cutting area small, a vertical slide cover separates it from the machine, and flushing nozzles on each side clear chips.
Specifications
| Item | VESTA-610D | |||
|---|---|---|---|---|
| 10K | 12K | 15K | ||
| Travel | ||||
| X-axis strokein | in | 24.0 | 24.0 | 24.0 |
| Y-axis strokein | in | 16.9 | 16.9 | 16.9 |
| Z-axis strokein | in | 22.4 | 22.4 | 22.4 |
| Distance from table surface to spindle gauge planein | in | 5.9 ~ 28.3 | 5.9 ~ 28.3 | 5.9 ~ 28.3 |
| Distance between column to the center of the spindlein | in | 20.9 | 20.9 | 20.9 |
| Table | ||||
| Working surfacein | in | 2ea - 25.6 x 17.7 | 2ea - 25.6 x 17.7 | 2ea - 25.6 x 17.7 |
| Table loading capacitylb | lb | 2ea - 661 | 2ea -661 | 2ea - 661 |
| Table surface configuration (T slots W x P / no. of slots)in | in | 2ea - 0.71 x 5.9 / | 2ea - 0.71 x 5.9 / | 2ea - 0.71 x 5.9 / |
| Spindle | ||||
| Max spindle speedrpm | rpm | 10,000 (Opt.: CTS) | 12,000 (Opt.: CTS) | 15,000 (Opt.: CTS) |
| Spindle motorHP | HP | 14.8 / | 24.8 / | 24.8 / |
| Type of spindle taper hole | ISO#40, 7/ | ISO#40, 7/ | ISO#40, 7/ | |
| Spindle bearing inner diameterin | in | Ø2.8 | Ø2.8 | Ø2.8 |
| Type of spindle | Direct-Coupled | Direct-Coupled | Direct-Coupled | |
| Method of spindle lubrication & cooling | Grease Lubrication + Jacket Cooling | Grease Lubrication + Jacket Cooling | Grease Lubrication + Jacket Cooling | |
| Feedrate | ||||
| Rapid traverse (X / Y / Z)ipm | ipm | 1,575 / | 1,575 / | 1,575 / |
| Motor | ||||
| Servo motor (X / Y / Z)HP | HP | 9.4 / | 9.4 / | 9.4 / |
| Coolant motor (spindle / bed flushing)HP | HP | 0.5 / | 0.5 / | 0.5 / |
| Spindle cooler (50/60Hz) / hydraulic motorHP | HP | 0.2 / | 0.2 / | 0.2 / |
| ATC | ||||
| Type of tool shank | MAS-403 BT-40 | MAS-403 BT-40 | MAS-403 BT-40 | |
| Type of pull stud | MAS P40T-1 (45˚) | MAS P40T-1 (45˚) | MAS P40T-1 (45˚) | |
| Tool storage capacityea | ea | 24 | 24 | 24 |
| Max. tool diameter (with / without adjacent tools)in | in | Ø3.5 / | Ø3.5 / | Ø3.5 / |
| Max. tool lengthin | in | 11.8 | 11.8 | 11.8 |
| Max. tool weightlb | lb | 18 | 18 | 18 |
| Method of tool selection | Memory Random | Memory Random | Memory Random | |
| Power sources | ||||
| Electric power supplykVA | kVA | 50 | 50 | 50 |
| Compressed air supply (pressure x consumption) | 73~102 psi x 690Nℓ/ | 73~102 psi x 690Nℓ/ | 73~102 psi x 690Nℓ/ | |
| Tank capacity | ||||
| Spindle cooling / lubricationgal | gal | 5.3 / | 5.3 / | 5.3 / |
| Coolant / hydraulicgal | gal | 104.3 / | 104.3 / | 104.3 / |
| Machine size | ||||
| Heightin | in | 105.9 [CTS.: 115.7] | 105.9 [CTS.: 115.7] | 105.9 [CTS.: 115.7] |
| Floor space (L x W)in | in | 156.7 x 84.1 | 156.7 x 84.1 | 156.7 x 84.1 |
| Weightlb | lb | 18,739 | 18,739 | 18,739 |
| NC controller | Fanuc 0i-MF Plus | Fanuc 0i-MF Plus | Fanuc 0i-MF Plus | |
Request a quote
Send the details and we will price the VESTA-610D with freight, rigging and the options you need.
Before you order: what your shop needs ready and the 2026 Section 179 rules
Call sales(817) 472-5178Related machines
- Hwacheon VESTA-500TIndependent twin spindle vertical machining center
- Hwacheon VESTA-650TIndependent twin spindle vertical machining center
- Hwacheon VESTA-800High-rigidity vertical machining center
- Hwacheon VESTA-850BHeavy duty vertical machining center for parts machining
- Hwacheon VESTA-1050BHeavy duty vertical machining center for parts machining
- Hwacheon VESTA-1100Vertical machining center for parts machining
- Hwacheon VESTA-1300+Vertical machining center for parts machining
- Hwacheon VESTA-1300B⁺Vertical machining center for parts machining
