Hwacheon VESTA-1650
Vertical machining center for parts machining
VESTA Series
Built to order. Ask for lead time.
Overview
1,650 x 750 x 675 mm travels, 1,500 kg table load
The VESTA-1650 is a vertical machining center for parts machining with a 750 mm Y axis. The X axis spreads its load over six LM blocks and the Y axis runs on four LM guide rails under the saddle. Travels are 1,650 / 750 / 675 mm over a 1,700 x 750 mm table rated for 1,500 kg. The direct-coupled spindle is BT-40 at 10,000 rpm as standard, with 12,000, 15,000 and BT-50 8,000 rpm options, and magazines run up to 60 tools.
Guides: when an HMC makes sense and choosing your first or next VMC
At a glance
- X / Y / Z travel
- 65.0 / 29.5 / 26.6 in
- Table size
- 66.9 x 29.5 in
- Spindle
- BT-40, 10,000 to 15,000 rpm; BT-50, 8,000 rpm
- Tool capacity
- 30 BT-40 (40 / 60 opt.) or 24 BT-50 (32 / 40 opt.)
- Control
- FANUC 0i-MF Plus
Features
- 01Six-block X axisThe X axis spreads its load over six LM blocks, and the Y axis runs on four LM guide rails for saddle rigidity.
- 021,700 x 750 mm tableThe table carries 1,500 kg on seven 18 mm T-slots at 100 mm pitch.
- 03Spindle optionsBT-40 at 10,000 rpm is standard, with 12,000 and 15,000 rpm options (18.5 kW, 117.7 Nm on FANUC). A BT-50 spindle runs to 8,000 rpm with 15 kW and 287 Nm.
- 04Magazines up to 60 toolsBT-40 magazines hold 30, 40 or 60 tools; BT-50 magazines hold 24, 32 or 40. Tool change is swing-arm, memory random.
- 05Chip handlingA side chip bucket is standard; back and side lift-up chip conveyors are options. A wide side door opens the machine for maintenance.
Video
VESTA-1650, machining
Specifications
| Item | VESTA-1650 | ||||
|---|---|---|---|---|---|
| 10K BT-40 | 12K BT-40 | 15K BT-40 | 8K BT-50 | ||
| Travel | |||||
| X-axis strokein | in | 65.0 | 65.0 | 65.0 | 65.0 |
| Y-axis strokein | in | 29.5 | 29.5 | 29.5 | 29.5 |
| Z-axis strokein | in | 26.6 | 26.6 | 26.6 | 26.6 |
| Distance from table surface to spindle gauge planein | in | 5.9 ~ 32.5 | 5.9 ~ 32.5 | 5.9 ~ 32.5 | 5.9 ~ 32.5 |
| Distance between column to the center of the spindlein | in | 29.9 | 29.9 | 29.9 | 29.9 |
| Table | |||||
| Working surfacein | in | 66.9 x 29.5 | 66.9 x 29.5 | 66.9 x 29.5 | 66.9 x 29.5 |
| Table loading capacitylb | lb | 3,307 | 3,307 | 3,307 | 3,307 |
| Table surface configuration (T slots W x P / no. of slots)in | in | 0.71 x 3.9 / | 0.71 x 3.9 / | 0.71 x 3.9 / | 0.71 x 3.9 / |
| Spindle | |||||
| Max spindle speedrpm | rpm | 10,000 (Opt.: CTS) | 12,000 (Opt.: CTS) | 15,000 (Opt.: CTS) | 8,000 (Opt.: CTS) |
| Spindle motorHP | HP | 24.8 / | 24.8 / | 24.8 / | 20.1 / |
| Type of spindle taper hole | ISO#40, 7/ | ISO#40, 7/ | ISO#40, 7/ | ISO#50, 7/ | |
| Spindle bearing inner diameterin | in | Ø2.8 | Ø2.8 | Ø2.8 | Ø3.5 |
| Type of spindle | Direct-Coupled | Direct-Coupled | Direct-Coupled | Direct-Coupled | |
| Method of spindle lubrication | Grease | Air-Oil | Air-Oil | Grease | |
| Method of spindle cooling | Jacket Cooling (Fan Cooler) | Jacket Cooling (Oil Cooler) | Jacket Cooling (Oil Cooler) | Jacket Cooling (Fan Cooler) | |
| Feedrate | |||||
| Rapid traverse (X / Y / Z)ipm | ipm | 1,181 / | 1,181 / | 1,181 / | 1,181 / |
| Motor | |||||
| Servo motor (X / Y / Z)HP | HP | 4.0 / | 4.0 / | 4.0 / | 4.0 / |
| Coolant motor (spindle)HP | HP | 0.5 | 0.5 | 0.5 | 0.5 |
| Spindle cooler (50/60Hz)HP | HP | 0.2 | 3.8 / | 3.8 / | 0.2 |
| ATC | |||||
| Type of tool shank | BT-40 (Opt.: CAT-40 / | BT-40 (Opt.: CAT-40 / | BT-40 (Opt.: CAT-40 / | BT-50 (Opt.: CAT-50 / | |
| Type of pull stud | MAS P40T-1 (45˚) | MAS P40T-1 (45˚) | MAS P40T-1 (45˚) | BT-50 (90˚) | |
| Tool storage capacityea | ea | 30 (Opt.: 40 / | 30 (Opt.: 40 / | 30 (Opt.: 40 / | 24 (Opt.: 32 / |
| Max. tool diameter (with / without adjacent tools)in | in | Ø3.1 / | Ø3.1 / | Ø3.1 / | Ø4.3 / |
| Max. tool lengthin | in | 11.8 | 11.8 | 11.8 | 13.8 |
| Max. tool weightlb | lb | 18 | 18 | 18 | 44 |
| Method of tool selection | Memory Random | Memory Random | Memory Random | Memory Random | |
| Power sources | |||||
| Electric power supplykVA | kVA | 45 | 45 | 45 | 45 [CTS : 55] |
| Compressed air supply (pressure x consumption) | 73~102 psi x 690Nℓ/ | 73~102 psi x 690Nℓ/ | 73~102 psi x 690Nℓ/ | 73~102 psi x 690Nℓ/ | |
| Tank capacity | |||||
| Spindle cooling / lubricationgal | gal | 5.3 / | 5.3 / | 5.3 / | 5.3 / |
| Coolantgal | gal | 132.1 | 132.1 | 132.1 | 132.1 |
| Machine size | |||||
| Heightin | in | 126.0 [CTS : 133.9] | 126.0 [CTS : 133.9] | 126.0 [CTS : 133.9] | 133.1 [CTS : 141.0] |
| Floor space (L x W)in | in | 165.4 x 177.6 | 165.4 x 177.6 | 165.4 x 177.6 | 165.4 x 177.6 |
| Weightlb | lb | 26,455 | 26,455 | 26,455 | 27,558 |
| NC controller | Fanuc 0i-MF Plus | Fanuc 0i-MF Plus | Fanuc 0i-MF Plus | Fanuc 0i-MF Plus | |
Request a quote
Send the details and we will price the VESTA-1650 with freight, rigging and the options you need.
Before you order: what your shop needs ready and the 2026 Section 179 rules
Call sales(817) 472-5178Related machines
- Hwacheon VESTA-610DDual table vertical machining center for parts machining
- Hwacheon VESTA-800High-rigidity vertical machining center
- Hwacheon VESTA-850BHeavy duty vertical machining center for parts machining
- Hwacheon VESTA-1050BHeavy duty vertical machining center for parts machining
- Hwacheon VESTA-1100Vertical machining center for parts machining
- Hwacheon VESTA-1300+Vertical machining center for parts machining
- Hwacheon VESTA-1300B⁺Vertical machining center for parts machining
- Hwacheon VESTA-2000Vertical machining center for parts machining
