Hwacheon SIRIUS-3000/5AX

Universal-head large 5-axis vertical machining center

SIRIUS 5AX Series

Built to order. Ask for lead time.

Overview

3,500 x 3,000 mm table, 3,500 / 3,000 / 1,500 mm travel with a universal head

The SIRIUS-3000/5AX is a large 5-axis vertical machining center for molds, dies and large precision parts, cut by simultaneous 5-axis or 3+2 in one setup. Its universal head is driven by direct-drive motors and carries a 24,000 rpm HSK-A63 spindle rated 69 kW. Travel is 3,500 / 3,000 / 1,500 mm with linear motors on X and Y and 60 / 60 / 45 m/min rapids, over a 3,500 x 3,000 mm table rated for 20,000 kgf. It comes with a 90-tool magazine and Heidenhain TNC 640.

Guide: 3-axis, 4-axis or 5-axis: what does your work need?

At a glance

X / Y / Z travel: 137.8 / 118.1 / 59.1 in
Table size: 137.8 x 118.1 in
Spindle: HSK-A63, 24,000 rpm
Tool capacity: 90
Control: Heidenhain TNC 640

Features

01Direct-drive universal headThree direct-drive motors move the head, two on B and one on C, with a 0.0001° rotary encoder and air and hydraulic clamping. B swings ±120°.
02Linear motors on X and YX and Y run on linear motors as standard, with 16 LM blocks on X and 7 on Y. Z uses twin ball screws, and every axis has scale feedback.
0320,000 kgf tableThe 3,500 x 3,000 mm table carries 20,000 kgf, with 18 T-slots at 200 mm pitch.
0424,000 rpm spindle, 90 toolsThe HSK-A63 spindle is rated 69 / 45 kW with air-oil lubrication and jacket cooling. A 90-tool chain magazine with swing arm changer takes tools up to 365 mm long.
05Heidenhain TNC 640 with HRCC IIHeidenhain TNC 640 is the control, and Hwacheon's HRCC II rotation center calibration is standard.
06Gas balance and chip handlingTwo high-pressure nitrogen cylinders offset the weight of the Z-axis unit. Two coil conveyors under the table clear chips, and the coolant tank holds 1,000 ℓ.

Video

SIRIUS-3000/5AX, large die and mold machining

Specifications

Travel

X-Axis travel: 137.8 in
Y-Axis travel: 118.1 in
Z-Axis travel: 59.1 in
B-Axis rotation angle / C-axis rotation angle: ±120 / 300 deg
Distance from table surface to spindle nose: -4.3 ~ 54.7 in

Table

Table size: 137.8 x 118.1 in
Max. table load: 44,092 lb
T-Slot (slot width x pitch / no. of slots): 0.9 x 7.9 in / 18 ea

Spindle

Max. spindle speed: 24,000 rpm
Spindle motor power: 92.5 / 60.3 HP
Spindle taper: HSK-A63
Spindle bearing inner diameter: Ø2.6 in
Spindle lubrication & cooling system: Air-Oil Lubrication + Jacket Cooling

Feedrate

Rapid traverse rate (X / Y / Z): 2,362 / 2,362 / 1,772 ipm
Rapid traverse rate (B / C): 50 / 50 rpm

Motor

Feed axis motor (X / Y / Z / B / C): 21.3 / 14.2 / 16.4 / 6.4 / 12.8 HP
Spindle cooling oil pump: 3.1 HP

Automatic tool changer (ATC)

Tool shank type: HSK-A63
Max. tool storage capacity: 90
Max. tool diameter (with / without adjacent tools): Ø3.0 / Ø5.9 in
Max. tool length: 14.4 in
Max. tool weight: 18 lb
Tool selection method: Fixed Address

Power requirements

Power capacity: 310 kVA
Compressed air (pressure x consumption): 73 ~ 102 psi

Tank capacity

Spindle cooling oil / grease: 37.0 / 0.2 gal
Coolant: 264.2 gal

Machine dimensions

Height: 269.3 in
Floor space - length: 423.9 in
Floor space - width: 348.1 in
Machine weight: 138,890 lb

NC system

NC system: Heidenhain TNC 640

Specifications from the manufacturer, converted from metric. Confirm the configuration on your quote.

Downloads

Request a quote

Send the details and we will price the SIRIUS-3000/5AX with freight, rigging and the options you need.

Before you order: what your shop needs ready and the 2026 Section 179 rules

Call sales(817) 472-5178