Hwacheon D2-5AX
5-axis vertical machining center for parts machining
D Series
Built to order. Ask for lead time.
Overview
Ø600 mm tilting rotary table, 650 / 500 / 500 mm travel
The D2-5AX is a 5-axis vertical machining center for production parts work, with a B/C tilting rotary table and a frame laid out for robots and Hwacheon's own AWC and HMP-100 automation. Travel is 650 / 500 / 500 mm over a Ø600 mm table rated for 500 kgf, with Ø400 and Ø500 tables as options and Ø500 standard when the AWC is fitted. Built-in spindles run from 12,000 rpm standard to 24,000 rpm, all at 37 kW max, with a 30-tool magazine and 40 or 60 tools as options. FANUC 0i-MF Plus with 4+1 axis control is standard; FANUC 31i-B5 Plus for simultaneous 5-axis is the option.
At a glance
- X / Y / Z travel
- 25.6 / 19.7 / 19.7 in
- Table size
- Ø23.6 in
- Spindle
- BBT-40 up to 20,000 rpm; HSK-A63 at 24,000 rpm
- Tool capacity
- 30 (40 or 60 optional)
- Control
- FANUC 0i-MF Plus (FANUC 31i-B5 optional)
Features
01Built for automationRobots can load from the front or the right side, and the right side takes Hwacheon's AWC workpiece changer or HMP-100 pallet system.
- 02Four spindle choicesBuilt-in motor spindles at 12,000 rpm (standard), 14,000, 20,000 and 24,000 rpm, all 37 kW max. Max torque is 250 Nm on the 12,000 rpm spindle and 303 Nm on the 14,000 rpm spindle.
- 03Dual worm gear rotary tableThe B and C axes use dual worm gears with a 0.0001° minimum input unit and hydraulic clamping. Hydraulic and pneumatic lines for automation are optional.
- 04Thermal controlJacket cooling with an oil cooler on the spindle and cooling of the frames limit thermal deformation over long runs. Hwacheon Thermal Displacement Control (HTDC) is standard.
- 05Hwacheon software standardHECC contour control, HTLD tool load detection and OPTIMA cutting feed optimization come standard. HRCC II rotation center calibration for 5-axis setup is optional.
- 06Control optionsFANUC 0i-MF Plus with 4+1 axis control is standard. FANUC 31i-B5 Plus with simultaneous 5-axis control is optional, as is the 19 inch HARMONY touch screen.
Video
D2-5AX with AWC 20, automatic workpiece changer
Specifications
| Item | D2-5AX | ||||
|---|---|---|---|---|---|
| 12K | 14K | 20K | 24K | ||
| Travel | |||||
| X-Axis travelin | in | 25.6 | 25.6 | 25.6 | 25.6 |
| Y-Axis travelin | in | 19.7 | 19.7 | 19.7 | 19.7 |
| Z-Axis travelin | in | 19.7 | 19.7 | 19.7 | 19.7 |
| B-Axis tilt angledeg | deg | -10 ~ +110 | -10 ~ +110 | -10 ~ +110 | -10 ~ +110 |
| C-Axis rotation angledeg | deg | 360 | 360 | 360 | 360 |
| Distance from table surface to spindle nosein | in | 6.9 ~ 26.6 | 6.9 ~ 26.6 | 6.9 ~ 26.6 | 6.9 ~ 26.6 |
| Distance from X-axis guideway surface to spindle centerin | in | 7.6 | 7.6 | 7.6 | 7.6 |
| Table | |||||
| Table sizein | in | Ø23.6 (Opt.: Ø15.7 / | Ø23.6 (Opt.: Ø15.7 / | Ø23.6 (Opt.: Ø15.7 / | Ø23.6 (Opt.: Ø15.7 / |
| Max. table loadlb | lb | 1,102 | 1,102 | 1,102 | 1,102 |
| T-Slot (slot width x pitch / no. of slots)in | in | 0.55 x 3.1 / | 0.55 x 3.1 / | 0.55 x 3.1 / | 0.55 x 3.1 / |
| Spindle | |||||
| Max. spindle speedrpm | rpm | 12,000 | 14,000 | 20,000 | 24,000 |
| Spindle motor powerHP | HP | 49.6 / | 49.6 / | 49.6 / | 49.6 / |
| Spindle taper | BBT-40 | BBT-40 | BBT-40 | BBT-40 | |
| Spindle bearing inner diameterin | in | Ø2.8 | Ø2.8 | Ø2.8 | Ø2.8 |
| Spindle drive type | Built-in Motor | Built-in Motor | Built-in Motor | Built-in Motor | |
| Spindle bearing lubrication | Grease | Oil-Jet | Oil-Jet | Oil-Jet | |
| Spindle cooling system | Jacket Cooling (Oil Cooler) | Jacket Cooling (Oil Cooler) | Jacket Cooling (Oil Cooler) | Jacket Cooling (Oil Cooler) | |
| Feedrate | |||||
| Rapid traverse rate (X / Y / Z)ipm | ipm | 1,417 / | 1,417 / | 1,417 / | 1,417 / |
| Rapid traverse rate (B / C)rpm | rpm | 25 / | 25 / | 25 / | 25 / |
| Motor | |||||
| Feed axis motor (X / Y / Z)HP | HP | 9.4 / | 9.4 / | 9.4 / | 9.4 / |
| Feed axis motor (B / C)HP | HP | 7.4 / | 7.4 / | 7.4 / | 7.4 / |
| Coolant motor (spindle / bed)HP | HP | 0.8 / | 0.8 / | 0.8 / | 0.8 / |
| Spindle cooling motor (50 / 60 hz)HP | HP | 3.8 / | 3.8 / | 3.8 / | 3.8 / |
| Automatic tool changer (ATC) | |||||
| Tool shank type | BBT-40 (Opt.: CAT-40 / | BBT-40 (Opt.: CAT-40 / | BBT-40 (Opt.: CAT-40 / | HSK-A63 | |
| Pull stud type | MAS P40T-1 (45°) | MAS P40T-1 (45˚) | MAS P40T-1 (45°) | MAS P40T-1 (45°) | |
| Max. tool storage capacityea | ea | 30 (Opt.: 40, 60) | 30 (Opt.: 40, 60) | 30 (Opt.: 40, 60) | 30 (Opt.: 40, 60) |
| Max. tool diameter (with / without adjacent tools)in | in | Ø3.1 / | Ø3.1 / | Ø3.1 / | Ø3.1 / |
| Max. tool lengthin | in | 11.8 | 11.8 | 11.8 | 11.8 |
| Max. tool weightlb | lb | 18 | 18 | 18 | 18 |
| Tool selection method | Memory Random | Memory Random | Memory Random | Memory Random | |
| Power requirements | |||||
| Power capacitykVA | kVA | 70 | 70 | 70 | 70 |
| Compressed air pressure | 0.5 ~ 0.7 | 0.5 ~ 0.7 | 0.5 ~ 0.7 | 0.5 ~ 0.7 | |
| Tank capacity | |||||
| Spindle cooling oil / lubricating oilgal | gal | 13.2 / | 13.2 / | 13.2 / | 13.2 / |
| Coolantgal | gal | 66.0 [Mesh Drum Type: 107.5] [Rear Discharge Type: 79.3] | 66.0 [Mesh Drum Type: 107.5] [Rear Discharge Type: 79.3] | 66.0 [Mesh Drum Type: 107.5] [Rear Discharge Type: 79.3] | 66.0 [Mesh Drum Type: 107.5] [Rear Discharge Type: 79.3] |
| Machine dimensions | |||||
| Heightin | in | 142.1 | 142.1 | 142.1 | 142.1 |
| Floor space (L x W)in | in | 145.7 x 138.7 [Mesh Drum Type: 173.7 x 138.7] [Rear Discharge Type: 137.8 x 172.0] | 145.7 x 138.7 [Mesh Drum Type: 173.7 x 138.7] [Rear Discharge Type: 137.8 x 172.0] | 145.7 x 138.7 [Mesh Drum Type: 173.7 x 138.7] [Rear Discharge Type: 137.8 x 172.0] | 145.7 x 138.7 [Mesh Drum Type: 173.7 x 138.7] [Rear Discharge Type: 137.8 x 172.0] |
| Machine weightlb | lb | 25,353 [Mesh Drum Type: 26,015] [Rear Discharge Type: 25,574] | 25,353 [Mesh Drum Type: 26,015] [Rear Discharge Type: 25,574] | 25,353 [Mesh Drum Type: 26,015] [Rear Discharge Type: 25,574] | 25,353 [Mesh Drum Type: 26,015] [Rear Discharge Type: 25,574] |
| NC system | |||||
| NC system | Fanuc 0i-MF Plus (Opt.: Fanuc 31i-B5) | Fanuc 0i-MF Plus (Opt.: Fanuc 31i-B5) | Fanuc 0i-MF Plus (Opt.: Fanuc 31i-B5) | Fanuc 0i-MF Plus (Opt.: Fanuc 31i-B5) | |
Request a quote
Send the details and we will price the D2-5AX with freight, rigging and the options you need.
Before you order: what your shop needs ready and the 2026 Section 179 rules
Call sales(817) 472-5178Related machines
- Hwacheon D3-5AX5-axis vertical machining center for parts machining
- Hwacheon M1-5AXHigh precision 5-axis vertical machining center for parts
- Hwacheon M2-5AXHigh precision 5-axis vertical machining center
- Hwacheon M3-5AXHigh precision 5-axis vertical machining center
- Hwacheon M4-5AXHigh precision 5-axis vertical machining center
- Hwacheon SIRIUS-2500 5AX5-axis angle head vertical machining center for die and mold
- Hwacheon SIRIUS-3000/5AXUniversal-head large 5-axis vertical machining center
- Hwacheon H6Horizontal machining center with pallet size of 630 mm
