Hwacheon D3-5AX

5-axis vertical machining center for parts machining

D Series

Built to order. Ask for lead time.

Overview

Ø800 mm tilting rotary table, 800 / 650 / 575 mm travel

The D3-5AX is the larger machine in Hwacheon's D Series, a 5-axis vertical machining center for production parts on a Ø800 mm B/C tilting rotary table. It is laid out for robot loading from the front or right side and for Hwacheon's HMP-300 and HMP-700 multi-pallet systems on the right. Travel is 800 / 650 / 575 mm, table load is 600 kgf, and built-in spindles run from 12,000 to 24,000 rpm at 37 kW max with a 30-tool magazine and 40 or 60 tools as options. FANUC 0i-MF Plus with 4+1 axis control is standard; FANUC 31i-B5 Plus for simultaneous 5-axis is the option.

Guide: 3-axis, 4-axis or 5-axis: what does your work need?

At a glance

X / Y / Z travel: 31.5 / 25.6 / 22.6 in
Table size: Ø31.5 in
Spindle: BBT-40 up to 20,000 rpm; HSK-A63 at 24,000 rpm
Tool capacity: 30 (40 or 60 optional)
Control: FANUC 0i-MF Plus (FANUC 31i-B5 Plus optional)

Features

01Ø800 mm table, 600 kgfA Ø800 mm round table rated for 600 kgf on dual worm gear B and C axes, with a 0.0001° minimum input unit and hydraulic clamping.
02Built for pallet automationRobots can load from the front or the right side, and the right side takes Hwacheon's HMP-300 and HMP-700 multi-pallet systems.
03Four spindle choicesBuilt-in motor spindles at 12,000 rpm (standard), 14,000, 20,000 and 24,000 rpm, all 37 kW max. Max torque is 250 Nm on the 12,000 rpm spindle and 303 Nm on the 14,000 rpm spindle.
04Crane loadingAn automatic ceiling opening and closing system opens the top of the enclosure so a crane can be used to load the table.
05Hwacheon software standardHTDC thermal displacement control, HECC contour control, HTLD tool load detection and OPTIMA cutting feed optimization come standard. HRCC II rotation center calibration is optional.
06Control optionsFANUC 0i-MF Plus with 4+1 axis control is standard. FANUC 31i-B5 Plus with simultaneous 5-axis control is optional, as is the 19 inch HARMONY touch screen.

Video

D3-5AX, multi pallet system cell

Specifications

Item		D3-5AX
Item		12K	14K	20K	24K
Travel
X-Axis travelin	in	31.5	31.5	31.5	31.5
Y-Axis travelin	in	25.6	25.6	25.6	25.6
Z-Axis travelin	in	22.6	22.6	22.6	22.6
B-Axis tilt angledeg	deg	-30 ~ +110	-30 ~ +110	-30 ~ +110	-30 ~ +110
C-Axis rotation angledeg	deg	360	360	360	360
Distance from table surface to spindle nosein	in	8.5 ~ 31.1	8.5 ~ 31.1	8.5 ~ 31.1	8.5 ~ 31.1
Distance from X-axis guideway surface to spindle centerin	in	7.6	7.6	7.6	7.6
Table
Table sizein	in	Ø31.5	Ø31.5	Ø31.5	Ø31.5
Max. table loadlb	lb	1,323	1,323	1,323	1,323
T-Slot (slot width x pitch / no. of slots)in	in	0.71 x 3.1 / 5 ea	0.71 x 3.1 / 5 ea	0.71 x 3.1 / 5 ea	0.71 x 3.1 / 5 ea
Spindle
Max. spindle speedrpm	rpm	12,000	14,000	20,000	24,000
Spindle motor powerHP	HP	49.6 / 24.8	49.6 / 29.5	49.6 / 24.8	49.6 / 24.8
Spindle taper		BBT-40	BBT-40	BBT-40	BBT-40
Spindle bearing inner diameterin	in	Ø2.8	Ø2.8	Ø2.8	Ø2.8
Spindle drive type		Built-in Motor	Built-in Motor	Built-in Motor	Built-in Motor
Spindle bearing lubrication		Grease	Oil-Jet	Oil-Jet	Oil-Jet
Spindle cooling system		Jacket Cooling (Oil Cooler)	Jacket Cooling (Oil Cooler)	Jacket Cooling (Oil Cooler)	Jacket Cooling (Oil Cooler)
Feedrate
Rapid traverse rate (X / Y / Z)ipm	ipm	1,181 / 1,181 / 1,181	1,181 / 1,181 / 1,181	1,181 / 1,181 / 1,181	1,181 / 1,181 / 1,181
Rapid traverse rate (B / C)rpm	rpm	25 / 25	25 / 25	25 / 25	25 / 25
Motor
Feed axis motor (X / Y / Z)HP	HP	9.4 / 5.4 / 5.4	9.4 / 5.4 / 5.4	9.4 / 5.4 / 5.4	9.4 / 5.4 / 5.4
Feed axis motor (B / C)HP	HP	19.8 / 26.8	19.8 / 26.8	19.8 / 26.8	19.8 / 26.8
Coolant motor (spindle / bed)HP	HP	0.8 / 0.8	0.8 / 0.8	0.8 / 0.8	0.8 / 0.8
Spindle cooling motor (50 / 60 hz)HP	HP	3.8 / 4.3	3.8 / 4.3	3.8 / 4.3	3.8 / 4.3
Automatic tool changer (ATC)
Tool shank type		BBT-40 (Opt.: CAT-40 / HSK-A63 / SK-40)	BBT-40 (Opt.: CAT-40 / HSK-A63 / SK-40)	BBT-40 (Opt.: CAT-40 / HSK-A63 / SK-40)	HSK-A63
Pull stud type		MAS P40T-1 (45°)	MAS P40T-1 (45˚)	MAS P40T-1 (45°)	MAS P40T-1 (45°)
Max. tool storage capacityea	ea	30 (Opt.: 40, 60)	30 (Opt.: 40, 60)	30 (Opt.: 40, 60)	30 (Opt.: 40, 60)
Max. tool diameter (with / without adjacent tools)in	in	Ø3.1 / Ø5.1	Ø3.1 / Ø5.1	Ø3.1 / Ø5.1	Ø3.1 / Ø5.1
Max. tool lengthin	in	11.8	11.8	11.8	11.8
Max. tool weightlb	lb	18	18	18	18
Tool selection method		Memory Random	Memory Random	Memory Random	Memory Random
Power requirements
Power capacitykVA	kVA	70	70	70	70
Compressed air pressure		0.5 ~ 0.7	0.5 ~ 0.7	0.5 ~ 0.7	0.5 ~ 0.7
Tank capacity
Spindle cooling oil / lubricating oilgal	gal	13.2 / 1.6	13.2 / 1.6	13.2 / 1.6	13.2 / 1.6
Coolantgal	gal	139.6	139.6	139.6	139.6
Machine dimensions
Heightin	in	142.2	142.2	142.2	142.2
Floor space (L x W)in	in	181.2 x 158.3	181.2 x 158.3	181.2 x 158.3	181.2 x 158.3
Machine weightlb	lb	34,348	34,348	34,348	34,348
NC system
NC system		Fanuc 0i-MF Plus (Opt.: Fanuc 31i-B5 Plus)	Fanuc 0i-MF Plus (Opt.: Fanuc 31i-B5 Plus)	Fanuc 0i-MF Plus (Opt.: Fanuc 31i-B5 Plus)	Fanuc 0i-MF Plus (Opt.: Fanuc 31i-B5 Plus)

Specifications from the manufacturer, converted from metric. Confirm the configuration on your quote.

Downloads

Request a quote

Send the details and we will price the D3-5AX with freight, rigging and the options you need.

Before you order: what your shop needs ready and the 2026 Section 179 rules

Call sales(817) 472-5178