Hwacheon Hi-M760

Mock-up & engraving vertical machining center

Hi-M Series

Built to order. Ask for lead time.

Overview

750 x 600 mm travel, 24,000 rpm mock-up and engraving machining center

The Hi-M760 is a double column vertical machining center from Hwacheon's Hi-M Series, built for mock-ups, engraving and mold work. It runs a grease-lubricated 24,000 rpm built-in spindle with an HSK-E40 taper and a 16-tool ATC. Travel is 750 / 600 / 350 mm over a 750 x 620 mm table rated for 400 kgf, with 25 / 25 / 20 m/min rapids. A full cover and the SIEMENS-828D control are standard, and FANUC 0i-MF is optional.

Guides: when an HMC makes sense and choosing your first or next VMC

At a glance

X / Y / Z travel: 29.5 / 23.6 / 13.8 in
Table size: 29.5 x 24.4 in
Spindle: HSK-E40, 24,000 rpm
Tool capacity: 16 tools
Control: Siemens 828D (FANUC 0i-MF option)

Features

01Built-in high-frequency spindleThe motor is built into the spindle shaft with no parts transferring power between them, which cuts vibration, noise and power loss at high speed. The Hi-M760 spindle runs to 24,000 rpm with an HSK-E40 taper and grease-lubricated bearings.
02Double column frameThe portal-type double column frame uses Meehanite castings in the main frames and was designed with 3D modeling and FEM analysis for structural stability.
03Ball screws fixed at both endsEach axis runs precision ball screws fixed at both ends on wide LM guides (2-rail, 6-block). Cutting feed is 1 to 10,000 mm/min.
0416-tool ATCThe fixed-address rotational ATC holds 16 tools up to Ø16 mm, 200 mm long and 3 kgf. Tool change takes 22 seconds tool to tool and 25 seconds chip to chip, and an auto door on the ATC keeps chips out.
05SIEMENS or FANUC controlSIEMENS-828D is standard and FANUC 0i-MF Plus is optional. Conversational programming is available as ShopMill on SIEMENS or Manual Guide i on FANUC, both as options.
06Tool length measurement optionAn optional tool length compensator (Renishaw, Blum or Metrol) measures tool length and diameter during the run and flags damaged tools. A work probe is not available because the spindle does not support orientation.

Specifications

Travel

X-axis stroke: 29.5 in
Y-axis stroke: 23.6 in
Z-axis stroke: 13.8 in
Table surface to spindle nose: 3.9 to 17.7 in

Table

Table size: 29.5 x 24.4 in
Max loading capacity: 882 lb
T-slot (W x P / no. of slots): 0.63 x 4.9 in / 5ea

Spindle

Max spindle speed: 24,000 rpm
Spindle motor: 15.0 HP
Spindle taper: HSK-E40
Spindle bearing inner diameter: Ø2.8 in
Spindle type: Built-in
Spindle lubrication: Grease

Feedrate

Rapid traverse (X / Y / Z): 984 / 984 / 787 ipm
Cutting feedrate (X / Y / Z): 0.039 to 394 ipm

Motor

Feed axis motor (X / Y / Z / Q): 2.5 / 2.5 / 2.5 / 2.0 HP [FANUC: 4.0 / 4.0 / 4.0 / 2.1 HP]
Coolant motor: 1.5 HP
Spindle cooler (50 / 60 Hz): 0.5 HP

ATC

Tool shank: HSK-E40
Pull stud: -
Tool storage capacity: 16
Max tool diameter: Ø0.6 in
Max tool length: 7.9 in
Max tool weight: 7 lb
Tool selection: Fixed Address

Power source

Electric power supply: 30 kVA

Tank capacity

Lubrication: 0.5 gal

Machine size

Height: 98.4 to 107.5 in
Floor space (L x W): 83.3 x 91.9 in
Weight: 10,494 lb

NC controller

NC controller: SIEMENS-828D (Opt.: FANUC 0i-MF)

Specifications from the manufacturer, converted from metric. Confirm the configuration on your quote.

Downloads

Request a quote

Send the details and we will price the Hi-M760 with freight, rigging and the options you need.

Before you order: what your shop needs ready and the 2026 Section 179 rules

Call sales(817) 472-5178