Hwacheon SIRIUS-650
High rigidity vertical machining center for die and mold
SIRIUS 650 to 1050
Built to order. Ask for lead time.
Overview
650 mm Y-axis, box ways and a gear-driven 50-taper spindle
The SIRIUS-650 is a C-frame vertical machining center for die and mold work, with box ways on all three axes and a gear-driven 50-taper spindle. The standard 5,000 rpm spindle shifts through three gear ranges for 1,145 Nm of torque, and an 8,000 rpm version is available. Travel is 1,300 / 650 / 650 mm over a 1,800 x 650 mm table rated for 1,500 kgf. It comes with a 24-tool ATC or without one.
Guides: when an HMC makes sense and choosing your first or next VMC
At a glance
- X / Y / Z travel
- 51.2 / 25.6 / 25.6 in
- Table size
- 70.9 x 25.6 in
- Spindle
- BBT-50, gear driven, 5,000 or 8,000 rpm
- Tool capacity
- 24 (version without ATC available)
- Control
- FANUC 31i-B
Features
- 01Scraped box ways on all axesAll three axes run on box ways, and the Y-axis slideway is widened for support and lower friction. The ways are precision scraped to absorb vibration and give smooth, precise movement.
- 02Gear-driven spindleThe standard 5,000 rpm spindle shifts automatically through three gear ranges and delivers 1,145 Nm (30 min). The 8,000 rpm option uses two ranges and delivers 316 Nm (30 min).
- 03Grease or oil-jet spindle lubricationThe 5,000 rpm spindle uses grease-lubricated bearings with the bearing assembly and gear housing jacket cooled by circulating oil. The 8,000 rpm spindle uses oil-jet lubrication with jacket cooling.
- 04C-frame with crane accessThe C-type frame and wide work area give direct access to the table, and large workpieces can be loaded and unloaded by crane.
- 05With or without ATCThe machine ships with a 24-tool memory random ATC, or without an ATC at 11,700 kgf instead of 12,200 kgf.
- 06Hwacheon machining software standardHTDC thermal displacement control, HECC contour control, HTLD tool load detection and OPTIMA feed optimization are standard. HTLD measures load every 8 msec to catch worn or broken tools.
Specifications
| Item | SIRIUS-650 | ||
|---|---|---|---|
| 5K | 8K | ||
| Travel | |||
| X-axis strokein | in | 51.2 | 51.2 |
| Y-axis strokein | in | 25.6 | 25.6 |
| Z-axis strokein | in | 25.6 | 25.6 |
| Distance from table surface to spindle gauge planein | in | 7.9 ~ 33.5 | 7.9 ~ 33.5 |
| Table | |||
| Working surfacein | in | 70.9 x 25.6 | 70.9 x 25.6 |
| Table loading capacitylb | lb | 3,307 | 3,307 |
| Table surface configuration (T slots W x P - no. of slots)in | in | 0.71 x 4.9 / | 0.71 x 4.9 / |
| Spindle | |||
| Max spindle speedrpm | rpm | 5,000 | 8,000 |
| Spindle motorHP | HP | 24.8 / | 24.8 / |
| Type of spindle taper hole | ISO#50, 7/ | ISO#50, 7/ | |
| Spindle bearing inner diameterin | in | Ø3.9 | Ø3.9 |
| Type of spindle | Gear Driven | Gear Driven | |
| Method of spindle lubrication | Grease | Oil Jet | |
| Method of spindle cooling | Jacket Cooling (Oil Cooler) | Jacket Cooling (Oil Cooler) | |
| Type of coolant | Spindle Oil [ISO VG 10] | Hi-Yun Oil [Hwacheon Special] | |
| Feedrate | |||
| Rapid traverse (X / Y / Z)ipm | ipm | 591 / | 591 / |
| Motor | |||
| Servo motor (X / Y / Z)HP | HP | 5.4 / | 5.4 / |
| Coolant motor (spindle / chip flushing)HP | HP | 0.5 / | 0.5 / |
| Spindle cooler (50/60hz) (50 / 60 hz)HP | HP | 2.5 / | 6.7 / |
| ATC | |||
| Type of tool shank | BBT-50 (Opt.: CAT-50) | BBT-50 (Opt.: CAT-50) | |
| Type of pull stud | BT-50 (90˚) | BT-50 (90˚) | |
| Tool storage capacityea | ea | 24 (Opt.: None ATC) | 24 (Opt.: None ATC) |
| Max. tool diameter (with / without adjacent tools)in | in | Ø4.3 / | Ø4.3 / |
| Max. tool lengthin | in | 13.8 [None ATC : -] | 13.8 [None ATC : -] |
| Max. tool weightlb | lb | 33 [None ATC : -] | 33 [None ATC : -] |
| Method of tool selection | Memory Random [None ATC : -] | Memory Random [None ATC : -] | |
| Power sources | |||
| Electric power supplykVA | kVA | 40 | 40 |
| Compressed air supply (pressure x consumption) | 73~102 psi x 1,230Nℓ/ | 73~102 psi x 1,230Nℓ/ | |
| Tank capacity | |||
| Spindle coolantgal | gal | 10.6 | 15.9 |
| Lubricationgal | gal | 3.2 | 3.2 |
| Coolantgal | gal | 158.5 | 158.5 |
| Machine size | |||
| Heightin | in | 126.4 | 126.4 |
| Floor space (L x W)in | in | 168.5 x 157.9 | 168.5 x 157.9 |
| Weightlb | lb | 26,896 [None ATC : 25,794] | 26,896 [None ATC : 25,794] |
| NC controller | Fanuc 31i-B | Fanuc 31i-B | |
Request a quote
Send the details and we will price the SIRIUS-650 with freight, rigging and the options you need.
Before you order: what your shop needs ready and the 2026 Section 179 rules
Call sales(817) 472-5178Related machines
- Hwacheon SIRIUS-850High rigidity vertical machining center for die and mold
- Hwacheon SIRIUS-1050High rigidity vertical machining center for die and mold
- Hwacheon VESTA-2000Vertical machining center for parts machining
- Hwacheon SIRIUS-UM⁺High-speed vertical machining center
- Hwacheon SIRIUS-UL+High-speed vertical machining center
- Hwacheon SIRIUS-UXHigh-speed vertical machining center
- Hwacheon SIRIUS-1250High rigidity vertical machining center for die and mold
- Hwacheon SIRIUS-1350High rigidity vertical machining center for die and mold
