Hwacheon HiT-360D
High speed dual table tapping center
HiT Series
Built to order. Ask for lead time.
Overview
Dual table tapping center, two 650 x 400 mm tables, 2.9 second change
The HiT-360D is a high speed drilling and tapping center with two tables: one is loaded while the other is in the machine, and they swap in 2.9 seconds. Hwacheon sets the HiT Series up for aluminum and IT parts, and on this model the table change, 1.6 second tool change and 50 / 50 / 60 m/min rapids cut idle time. Travels are 520 / 360 / 300 mm, and each 650 x 400 mm table carries 250 kg. The direct-coupled BBT-30 spindle runs to 12,000 rpm on FANUC or 15,000 rpm on SIEMENS, with 24,000 rpm optional.
Guides: when an HMC makes sense and choosing your first or next VMC
At a glance
- X / Y / Z travel
- 20.5 / 14.2 / 11.8 in
- Table size
- 2 x 25.6 x 15.7 in
- Spindle
- BBT-30, 12,000 or 15,000 rpm (opt. 24,000)
- Tool capacity
- 21 tools
- Control
- FANUC 0i-MF or Siemens 828D
Features
- 01Two tables, 2.9 second changeTwo 650 x 400 mm tables, each rated 250 kg, swap by an up / down change in 2.9 seconds with 500 kg total mass. The tables rotate on a hydraulically driven rack and pinion.
- 021.6 second chip to chipThe 21-tool magazine takes BBT-30 tools up to Ø80 mm, 150 mm long and 2.5 kg, and changes chip to chip in 1.6 seconds.
- 03Direct-coupled BBT-30 spindleThe direct-coupled spindle uses two-face contact BBT-30 tooling and ceramic bearings. It runs to 12,000 rpm on FANUC or 15,000 rpm on SIEMENS, with 24,000 rpm optional.
- 0450 / 50 / 60 m/min rapidsAll axes run on roller LM guides, with servo motors coupled directly to tubeless ball screws. Rapids are 50 / 50 / 60 m/min.
- 05Moving column layoutOn the HiT-360D the column traverses while the dual table stays in place; the HiT-400 and HiT-400L move the table instead.
- 06Hwacheon software standardHECC contour control, HTLD tool load detection and OPTIMA feed optimization are standard. HTDC thermal displacement control is an option.
Video
HiT series, tapping centers
Specifications
| Item | HiT-360D | ||||
|---|---|---|---|---|---|
| 12K [FANUC] | 15K [SIEMENS] | 24K [FANUC] | 24K [SIEMENS] | ||
| Travel | |||||
| X-axis strokein | in | 20.5 | 20.5 | 20.5 | 20.5 |
| Y-axis strokein | in | 14.2 | 14.2 | 14.2 | 14.2 |
| Z-axis strokein | in | 11.8 | 11.8 | 11.8 | 11.8 |
| Max. distance between table surface to spindle nosein | in | 7.5 ~ 19.3 | 7.5 ~ 19.3 | 7.5 ~ 19.3 | 7.5 ~ 19.3 |
| Distance from column to spindle centerin | in | 17.9 | 17.9 | 17.9 | 17.9 |
| Table | |||||
| Table sizein | in | 25.6 x 15.7 (2ea) | 25.6 x 15.7 (2ea) | 25.6 x 15.7 (2ea) | 25.6 x 15.7 (2ea) |
| Max. loading capacitylb | lb | 551 (2ea) | 551 (2ea) | 551 (2ea) | 551 (2ea) |
| T-slot (slot W x P / no. of slots)in | in | 0.94 x 4.9 / | 0.94 x 4.9 / | 0.94 x 4.9 / | 0.94 x 4.9 / |
| Table change timesec | sec | 2.9 (Total mass 500kg) | 2.9 (Total mass 500kg) | 2.9 (Total mass 500kg) | 2.9 (Total mass 500kg) |
| Table change type | Up / | Up / | Up / | Up / | |
| Spindle | |||||
| Max spindle speedrpm | rpm | 12,000 (Opt.: CTS) | 15,000 (Opt.: CTS) | 24,000 (Opt.: CTS) | 24,000 (Opt.: CTS) |
| Spindle motorHP | HP | 10.1 / | 9.7 / | 10.1 / | 9.7 / |
| Type of spindle taper hole | BBT-30 | BBT-30 | BBT-30 | BBT-30 | |
| Spindle bearing inner diameterin | in | Ø2.8 | Ø2.8 | Ø2.8 | Ø2.8 |
| Type of spindle | Direct-Coupled | Direct-Coupled | Direct-Coupled | Direct-Coupled | |
| Method of spindle lubrication | Grease | Grease | Grease | Grease | |
| Method of spindle cooling | Jacket Cooling (Fan Cooler) | Jacket Cooling (Fan Cooler) | Jacket Cooling (Oil Cooler) | Jacket Cooling (Oil Cooler) | |
| Feedrate | |||||
| Rapid traverse (X / Y / Z)ipm | ipm | 1,969 / | 1,969 / | 1,969 / | 1,969 / |
| Motor | |||||
| Feed-axis (X / Y / Z)HP | HP | 4.0 / | 4.4 / | 4.0 / | 4.4 / |
| Coolant motor (spindle / bed)HP | HP | 0.3 / | 0.3 / | 0.3 / | 0.3 / |
| Spindle cooler (50/60Hz)HP | HP | 1.6 | 1.6 | 1.6 | 1.6 |
| ATC | |||||
| Type of tool shank | BBT-30 | BBT-30 | BBT-30 | BBT-30 | |
| Type of pull stud | 45° | 45° | 45° | 45° | |
| Tool storage capacityea | ea | 21 | 21 | 21 | 21 |
| Max. tool diameterin | in | Ø3.1 | Ø3.1 | Ø3.1 | Ø3.1 |
| Max. tool lengthin | in | 5.9 | 5.9 | 5.9 | 5.9 |
| Max. tool weightlb | lb | 6 | 6 | 6 | 6 |
| Method of tool selection | Fixed Address | Fixed Address | Fixed Address | Fixed Address | |
| Tool change time (C to C)sec | sec | 1.6 | 1.6 | 1.6 | 1.6 |
| Power source | |||||
| Electric power supplykVA | kVA | 25 | 25 | 25 | 25 |
| Power specification | 220V, 60Hz | 380V, 60Hz | 220V, 60Hz | 380V, 60Hz | |
| Compressed air (pressure x consumption)psi | psi | 71 | 71 | 71 | 71 |
| Tank capacity | |||||
| Lubricationgal | gal | 0.5 | 0.5 | 0.5 | 0.5 |
| Coolantgal | gal | 105.7 | 105.7 | 105.7 | 105.7 |
| Machine size | |||||
| Heightin | in | 97.4 [Top Cover : 109.6] [CTS : 115.6] | 97.4 [Top Cover : 109.6] [CTS : 115.6] | 97.4 [Top Cover : 109.6] [CTS : 115.6] | 97.4 [Top Cover : 109.6] [CTS : 115.6] |
| Floor space (L x W)in | in | 117.2 x 74.2 | 117.2 x 74.2 | 117.2 x 74.2 | 117.2 x 74.2 |
| Weightlb | lb | 7,716 | 7,716 | 7,716 | 7,716 |
| NC controller | FANUC 0i-MF | SIEMENS-828D | FANUC 0i-MF | SIEMENS-828D | |
Request a quote
Send the details and we will price the HiT-360D with freight, rigging and the options you need.
Before you order: what your shop needs ready and the 2026 Section 179 rules
Call sales(817) 472-5178Related machines
- Hwacheon HiT-400High speed tapping center
- Hwacheon HiT-400LHigh speed tapping center
- Hwacheon L1Double column vertical machining center for plates
- Hwacheon L2Double column vertical machining center for plates
- Hwacheon L3Double column vertical machining center for plates
- Hwacheon U1Compact vertical machining center optimized for precision machining
- Hwacheon SMART UaXSmart machine for graphite electrode
- Hwacheon SMART Ua STEELSmart machine for small steel mold
