Hwacheon HRD-2000

Radial drilling machine

HRD Series

Built to order. Ask for lead time.

Overview

Radial drill with 2,023 mm swing, 75 mm in steel

The HRD-2000 is one of the two large radial drills in Hwacheon's HRD Series, built on a heat-treated machine structure with a Ø500 mm column. It drills 75 mm in steel and 90 mm in cast iron, taps M60 / M80 and bores 220 / 280 mm, reaching 393 to 2,023 mm from the column face. The MT #5 spindle runs 22 to 2,080 rpm in 16 steps on a 7.5 kW motor, with 400 mm of automatic spindle travel. Machine weight is 7,850 kgf.

At a glance

Swing: 79.6 in
Drilling capacity: 3.0 / 3.5 in (steel / cast iron)
Spindle taper: MT #5
Spindle speed: 22 to 2,080 rpm, 16 steps

Features

01Speed pre-selectionA pre-selection dial sets the next spindle speed while the machine is running; moving the lever then changes to it.
02Column head clampingThe column clamp head locks independently or simultaneously, from a button at the front of the head.
03400 mm automatic spindle travelThe spindle moves vertically under automatic feed for up to 400 mm, for drilling deep holes.
0416 speeds, 12 feedsThe spindle runs 22 to 2,080 rpm (60 Hz) in 16 steps on a 7.5 kW motor, with 12 feed steps from 0.04 to 1.33 mm/rev.
05Standard accessoriesA working table (800 x 650 x 555 mm), coolant system, drill chuck with shank, MT 5 x 4, 3, 2, 1 drill sockets, anchor bolts, and tools with a tool box come standard. A drill tapper (tap and drill quick change chuck) is optional.

Specifications

Capacity

Drilling capacity (steel / cast iron): 3.0 / 3.5 in
Tapping capacity (steel / cast iron): M60 / M80
Boring capacity (steel / cast iron): 8.7 / 11.0 in
Distance from center of the spindle to face of the column: 15.5 ~ 79.6 in
Distance from center of the column to end of the arm: 103.5 in
Distance from base to the spindle nose: 15.4 ~ 67.3 in

Spindle

Number of spindle speed: 16 Step
Max spindle speed: 22 ~ 2,080 rpm
Spindle taper: MT #5
Diameter of spindle / sleeve: Ø3.3 / Ø4.3 in
Vertical travel of spindle: 15.7 in
Vertical travel of arm: 36.2 in
Number of feed speed: 12 Step
Range of feed speed: 0.0016 ~ 0.0524 in/rev
Spindle motor: 10.1 HP

Power source

Coolant pump: 100 W
Clamping motor: 2.0 HP
Arm elevating motor: 5.0 HP

Machine size

Diameter of column: Ø19.7 in
Working surface of base (L x W): 81.9 x 48.8 in
Base size (L x W x H): 122.0 x 49.2 x 10.2 in
Height: 118.7 ~ 130.3 in
Weight: 17,306 lb

Specifications from the manufacturer, converted from metric. Confirm the configuration on your quote.

Downloads

Request a quote

Send the details and we will price the HRD-2000 with freight, rigging and the options you need.

Before you order: what your shop needs ready and the 2026 Section 179 rules

Call sales(817) 472-5178