Hwacheon HL-950

Manual lathe

HL Series

Built to order. Ask for lead time.

Overview

Manual lathe, Ø950 mm swing over bed and 3,000 to 6,000 mm between centers

The HL-950 is the largest model of Hwacheon's HL Series of manual lathes, built on a rigid bed for stable, precise work and laid out for easy operation. It comes in four bed lengths, with 3,000, 4,000, 5,000 or 6,000 mm between centers and the same cutting length, swings Ø950 mm over the bed and Ø1,200 mm over the gap, and carries 500 kgf in its 18 inch 4-jaw independent chuck. The 15 kW spindle has a Ø105 mm bore and an A2-11 nose and runs 17 to 850 rpm in 12 steps. It has 72 feed changes and cuts metric threads from 0.5 to 112 mm and inch threads from 0.25 to 56 TPI.

At a glance

Swing over bed: Ø37.4 in
Distance between centers: 118.1 / 157.5 / 196.9 / 236.2 in
Spindle bore: Ø4.1 in
Spindle speed: 17 to 850 rpm, 12 steps

Features

01Four bed lengths3,000, 4,000, 5,000 or 6,000 mm between centers, with cutting length equal to the distance between centers, on a 600 mm wide bed.
02Ø105 mm spindle boreThe 15 kW spindle has a Ø105 mm through hole, an A2-11 nose and a metric No.120 bore taper, and runs 17 to 850 rpm in 12 steps.
0372 feed changesLongitudinal feeds run from 0.044 to 19.930 mm/rev and cross feeds from 0.022 to 9.965 mm/rev. Threads: metric 0.5 to 112 mm, inch 0.25 to 56 TPI, D.P. 1 to 56 and module 0.5 to 28.
04260 mm tailstock strokeThe tailstock has 260 mm of stroke and an MT No.6 center taper.
05Standard equipmentStandard equipment includes an 18 inch 4-jaw independent chuck with flange, live and dead centers (MT No.6), a foundation tooling set, coolant equipment, an inching switch, tailstock quill reduction equipment and a work light.
06OptionsOptions include three roller steady rests covering Ø1.97 to Ø25.59 in, a follow rest, a Ø810 mm face plate, a 14 inch 3-jaw chuck, 20, 24, 28 or 32 inch 4-jaw chucks, a taper attachment and a 2- or 3-axis digital scale.

Specifications

Item		HL-950
Item		HL-950 x 3000	HL-950 x 4000	HL-950 x 5000	HL-950 x 6000
Capacity
Swing over bedin	in	Ø37.4	Ø37.4	Ø37.4	Ø37.4
Swing over saddlein	in	Ø24.8	Ø24.8	Ø24.8	Ø24.8
Max. cutting dia over bedin	in	Ø37.4	Ø37.4	Ø37.4	Ø37.4
Distance between centersin	in	118.1	157.5	196.9	236.2
Cutting lengthin	in	118.1	157.5	196.9	236.2
Max. loading capacitykgf	kgf	500 [18” 4 Jaw Independent Chuck]	500 [18” 4 Jaw Independent Chuck]	500 [18” 4 Jaw Independent Chuck]	500 [18” 4 Jaw Independent Chuck]
Gap (opt)
Swing over gapin	in	Ø47.2	Ø47.2	Ø47.2	Ø47.2
Gap lengthin	in	11.8	11.8	11.8	11.8
Spindle
Spindle bore diameterin	in	Ø4.1	Ø4.1	Ø4.1	Ø4.1
Type of spindle noseASA	ASA	A2-11	A2-11	A2-11	A2-11
Number of spindle speed		12 Step	12 Step	12 Step	12 Step
Max spindle speedrpm	rpm	17 ~ 850	17 ~ 850	17 ~ 850	17 ~ 850
Spindle taperMetric taper	Metric taper	No.120	No.120	No.120	No.120
Spindle center taperMT	MT	No.6	No.6	No.6	No.6
Spindle motorHP	HP	20.1	20.1	20.1	20.1
Carriage
No. of feed change		72 Step	72 Step	72 Step	72 Step
Range of X-axis feedsin/rev	in/rev	0.0017 ~ 0.7846	0.0017 ~ 0.7846	0.0017 ~ 0.7846	0.0017 ~ 0.7846
Range of Y-axis feedsin/rev	in/rev	0.00087 ~ 0.3923	0.00087 ~ 0.3923	0.00087 ~ 0.3923	0.00087 ~ 0.3923
Range of cross feeds (X-axis)in	in	21.9	21.9	21.9	21.9
Cross slide travel (Y-axis)in	in	11.4	11.4	11.4	11.4
Bite holder size (L x W)in	in	□1.6	□1.6	□1.6	□1.6
Screw cutting
Lead screw (dia. X pitch)in	in	Ø2.0 x 0.47	Ø2.0 x 0.47	Ø2.0 x 0.47	Ø2.0 x 0.47
Inch threadsTPI	TPI	0.25 ~ 56	0.25 ~ 56	0.25 ~ 56	0.25 ~ 56
Metric threadsmm	mm	0.5 ~ 112	0.5 ~ 112	0.5 ~ 112	0.5 ~ 112
D.P threadsD.P	D.P	1 ~ 56	1 ~ 56	1 ~ 56	1 ~ 56
Module threadsModule	Module	0.5 ~ 28	0.5 ~ 28	0.5 ~ 28	0.5 ~ 28
Tailstock
Tailstock travelin	in	10.2	10.2	10.2	10.2
Tailstock center taperMT	MT	No.6	No.6	No.6	No.6
Bed
Bed widthin	in	23.6	23.6	23.6	23.6
Bed lengthin	in	208.7	248.0	287.4	326.8
Tank capacity
Coolantgal	gal	21.1	21.1	21.1	21.1
Coolant motorW	W	180	180	180	180
Power source
Power capacitykVA	kVA	29	29	29	29
Power specification		380V, 60Hz / 220V, 60Hz	380V, 60Hz / 220V, 60Hz	380V, 60Hz / 220V, 60Hz	380V, 60Hz / 220V, 60Hz
Machine size
Heightin	in	59.4	59.4	59.4	59.4
Floor space (L x W)in	in	220.1 x 71.6	259.4 x 71.6	298.8 x 71.6	338.2 x 71.6
Weightlb	lb	18,960	20,283	21,605	22,928

Specifications from the manufacturer, converted from metric. Confirm the configuration on your quote.

Downloads

Request a quote

Send the details and we will price the HL-950 with freight, rigging and the options you need.

Before you order: what your shop needs ready and the 2026 Section 179 rules

Call sales(817) 472-5178